Chlamydia test

Chlamydia test content:

1x testament fluid 1 (0.15m Naoh)
1x testament fluid 2 (0.2m HCI)
1x test cassette
1x Podeste (Women / Unisex)
1x extraction pipe
1x pipettes tip

Chlamydia test use

This is a step -by -step guide to sampling mhp. to get an immediate answer/result on chlamydia test via lightning test cassette.

Step 1:

Sampling chlamydia test men:
Before the podium 2-4 cm. up in the urethra. Turn the podium around 360 degrees and let the stick sit in the urethra for 10 seconds. Then pull it out.

Sampling chlamydia test women:
Before the podium into the vagina, until most of the stick is no longer visible. Turn the podium around 360 degrees and leave the stick in the vagina for 15 seconds. Then pull it out. Try to avoid contamination from the outer part of the genitals.

Step 2:

Keep reagent bottle 1 vertically, while 6 drops of the liquid are dripped into the extraction pipe. Before the podium down into the tube. Press each side to the tube and squeeze the podium. Now turn the podium 15 times and leave the tube for 2 minutes.

Step 3:

Keep reagent bottle 2 vertically, while 7 drops of the liquid are dripped into the extraction pipe. Before the podium down into the tube. Also press each side of the tube and squeeze the pod. Turn the podium 15 times around and leave the tube for 1 minute.

Step 4:

Press the liquid out of the podium by pressing the stick against the side of the tube and then pull it out while squeezing the tube. Let as much fluid stay in the tube as possible.

Step 5:

Put the included pipettes tip on top of the extraction pipe.

Step 6:

Place the test cassette horizontally on a surface. Then drip 3 whole drops into the sample burning. Wait 10 minutes and read the result. Do not read results older than 30 minutes.